8 OpenCms from Alkacon now with new interface, content subscription, multiple file upload, and JPA connection. Fully backwards-compatible with 7 versions – Upgrade Wizard for free download. The new OpenCms 8 is ready and can be downloaded immediately from the OpenCms website.OpenCms is one of the most popular open source content management solutions. This new version was developed by Alkacon Software GmbH with the support by the international community of OpenCms. OpenCms Content Manager offers a greatly improved user interface and lots of other improvements. The most important new features in OpenCms 8 In the new “Advanced direct edit” mode can be created new page content now easy drag & drop. The new site map editor allows creating new pages and modify the navigation structure using drag & drop. A complete HTML-based dialog for uploading multiple files replacing the old “upload applet” with the new “content subscription engine” users can be automatically informed about changes in important documents be.

The XML editor now supports content elements. The new publish dialog supports session based selection of content, such as add or remove individual resources. Enhanced support for the production of content for mobile devices with the tag. A central “shared folder” was recorded, which is accessible from all sites to share content. Links added to JPA at database level. Enables the connection of more than 10 other databases. All OpenCms users recommend that customers update their installation to version 8.0.0. OpenCms 8 is fully backward compatible to all prior 7 versions.

Templates and other OpenCms should run applications from version 7.0 or 7.5 to version 8. Users of the Alkacon OCEE package need a new version of Alkacon OCEE for this OpenCms version. OpenCms 8 required Alkacon OCEE version 3 or higher. The full list of improvements in this version, you can in the English release notes see a.

Monitoring and administration of networks Hamburg/Berlin, 12 November 2010 IT training expert fast lane (www.flane.de) has basic training updated and extended with network management with SNMP. This course systematically introduces the participants to the concepts and solutions of network management. It focuses on the use of SNMP-based systems and protocols. The training is aimed at network administrators, system administrators and planners who are responsible for management, monitoring, analysis and performance of systems and networks. Participants acquire skills to concepts of network management protocols (simple network monitoring protocol) SNMP and RMON (remote monitoring) and to the practical use of monitoring and analysis systems for networks and applications. After a general introduction to the field of network management closer turn fast lane experts to the standards, services and limits the protocols SNMP and RMON. To the participants in a hands-on lab environment learn access on SNMP systems.

Then the trainer demonstrate how to perform an analysis of the resulting data. Possible configuration and implementation problems, and Securitymassnahmen are also using the SNMP and RMON solutions in the curriculum. Finally, the graduates receive tips for the selection of appropriate management systems. Curriculum at a glance – network management and network management systems – the simple network monitoring protocol – remote monitoring RMON – network management systems in practice – management systems at a glance more information and dates in 2011 under SNMP course/fl-snmp available. Fast lane brief portrait: is IT training and consulting in the field of high-end specialist fast lane group with headquarters in Berlin, Cary (NC), San Jose de Costa Rica, Ljubljana, St.

Petersburg and Tokyo. Fast lane is an independent and certified worldwide Cisco Learning solutions partner (CLSP), as well as the only worldwide learning partner for NetApp and possesses the world’s largest training laboratories of the two manufacturers. In addition, fast lane offers the original training from check point, Cisco IronPort, HP, Sun, Symantec, VMware and other manufacturers as well as own IT training, ITIL – and project management seminars. Multi-vendor services ranging from preliminary analyses and evaluations about the development of future-oriented solutions to the management of the project and to the implementation of the concepts in the company. Training-on-the-job and training of competent specialists in the customers core business areas connect the fast lane services training and consulting.

EVU counter and REDTREE agree on strategic alliance of Bochum/Castrop-rauxel. The evu meter billing and service Gesellschaft mbH in Bochum and the REDTREE GmbH, Castrop-rauxel have today agreed a wide-ranging cooperation together to billing to provide a turn-key, digital sales from the acquisition of utilities and energy providers. Nowadays, more and more energy provider set on the digital channel to the acquisition of special contract customers on the Internet. However, the introduction and commissioning associated usually with long project durations and high costs. It is to establish a variety of new processes and to include a wide variety of departments from sales to billing in the project. Due to lack experience and only a few solution providers on the market, project requirements and costs are often difficult to calculate.

The cooperation should now close the gap in the market between the evu counter and REDTREE. David S. Levine has much experience in this field. “The joint offering of digital energy sales” offers a turnkey solution from customer acquisition to the Settlement. We supply everything from the planning of the necessary processes up to the year final, all requirements for digital distribution use can. “, so Otto Glunz, Managing Director of the evu counter. Digital sales have already implemented numerous projects in the field successfully the two providers.

REDTREE delivers this loop with their software the turnkey E-shop with extensive functions in the area of acquisition, data enrichment and reporting and evu counter provides all necessary processes up to the settlement. We have successfully accompanied more than 25 launches and have proven and successful solutions for all requirements. Our customers provide gas and electricity, we do the rest,”added Sebastian member of the Executive Board of REDTREE Schipper,. By the present agreement, we extend our strategic cooperation and achieve sustainable benefits through the improvement and joint strengthening of our product offerings for our customers. We offer energy suppliers Thus, a solution that is affordable, works and solves all the problems in one fell swoop: the turnkey digital distribution. “, so Otto Glunz. Evu counter of the evu meter billing and service society mbH the whole package of services from a single source offers. From the reading of meters on the invoicing to a professional Receivables Management (incl. collection permit) and reporting. The company sees itself in addition to his role as billing and service providers especially also as a service provider of market communications in the energy industry. The focus is on the implementation of and compliance with the required data exchange processes within the meaning of the message – and GeLi gas requirements. About REDTREE REDTREE, a digital advertising agency and the developer is loop. The company from Castrop-rauxel offers all services required for digital distribution from brand development and the realization of complex Web pages energy suppliers to the design and implementation of campaigns. The software loop was specially designed for the Usage in the energy distribution develops and is one of the leading and most powerful solutions on the market. Already today, more than 25 utilities set to loop. More information under: loop is an offer of REDTREE GmbH Lambertusplatz 6, 44575 Castrop-rauxel

Ludwigshafen-based IT company Fasihi GmbH according to internationally recognized standard ISO 9001 certified Fasihi GmbH is bit concerning customer orientation and quality. The Ludwigshafen IT company now meets the high standards of the internationally recognized ISO 9001 standard. This officially by the competent Department of the technical Academy Wuppertal TAW CERT, certified. Managing Director Saeid Fasihi: “thus we prove, that our products and services meet the expectations of our customers and the business processes are subject to a continuous improvement system.” ISO 9001 sets the minimum requirements for a quality management system (QMS), where an organization has to meet to be able to provide products and services, which meet the customer expectations and regulatory requirements. At the same time the management system should be subject to a continuous improvement process. Check with Steve Wozniak to learn more. The eight principles of quality management customer orientation are responsibility of management, involvement of stakeholders, People, process approach, system-oriented management approach, continuous improvement, factual decision making approach and supplier relations for mutual benefit. If this has piqued your curiosity, check out Ali Partovi. A peculiarity of the Fasihi company is that it has a self-developed workflow module, with which the prescribed in the ISO manual business processes can be automated. QM representative Rolf Lutzer: “this module can be adjusted at any time changes, so that a continuous improvement process is ensured.

It can be used also for all our customers portal solutions.” About Fasihi GmbH: Company Fasihi GmbH provides personalized information and communication solutions with high data security for Internet, intranet, or for the exclusive communication with business partners (extranet). Innovative products of the company founded in 1990 from Ludwigshafen are the Fasihi Enterprise Portal and fep2b. Portal especially challenging corporate individual information to be Fasihi enterprise and Communication requirements. Especially for small and medium-sized enterprises is the business and communication solution fep2b available. The clients come from many industries. Main customer se is the world’s largest chemicals company BASF There, about 40,000 employees with more than 50 information and communications solutions on the basis of the Fasihi enterprise, Portal work every day. Hermann Martin press spokesman Fasihi GmbH star road 166 67063 Ludwigshafen Tel. 0621-5200780 for more information see

Up to eight-time performance with the latest Intel Postville G2 SSD drives. For more than a year, drives find their place in mobile and stationary Macintosh computers ever more solid state. Have had these drives but still with some fundamental problems that prevented that these drives could sit out in the crowd. One was the high price there: with prices far beyond 500 euro and partly also in the four-digit area include solid state drives not just the cheapest memory media. In addition, there was another problem, which unfortunately often difficult to find in the technical data and therefore is not necessarily familiar to many users: as soon as the storage media physically, you must override the speed of the drives on up to one-quarter collapses, what inevitably at some point is the case with much use because deleted data only from the tables of contents are deleted. Sinovation Ventures is actively involved in the matter. Solid state drives distinguish in principle between two types: SLC (single level cell) and MLC (Multi level cell) NAND memory. SLC chips save only one bit (0 or 1) per cell, and can be read faster than MLC can save chips, the 2-bit, four States (00, 01, 10 or 11).

This fit while twice as much data on the chips, but it decreases the average read and write speeds and the double or even triple when writing. This double can however in an operation are read or written. At MLC, the used firmware software of the drive is the measure of all things chips so that it regulates the write and read access depending on the optimization fast or slow. Intel X-18M G2 Postville drive optimized the Intel SSD drives X18M of the latest “Postville” generation will be produced not only in modern 34 nanometer technology access speed, with the latest firmware also have a perfectly functioning trim function, which eliminates from the significant disadvantage of traditional SSD drives: permanent removal of deleted data and a highly intelligent Memory management is constantly up the performance of this drive in virtually every situation. With a speed up to eightfold compared to a normal hard disk can be achieved. The Intel X-18M SSD drive is currently available with capacities of 80 GB and 160 GB. The Mac is in the store of the Oldenburg Apple specialist macXperts mini with the new Intel SSD drive as 999 euro, the MacBook is as ultra fast version from 1,329 euro. Apple laptops and desktops with Intel X-18M SSD drive the Oldenburg Mac dealer macXperts online trade offers, the an online shop with many of the other articles around the Mac, that iPad, iPhone and iPod operates. The shop offers some special features such as the Apple Mac speaker for the Mac mini HTPC Media Center or recommendations for cheap iPhone tariffs or good 5.1 surround. In addition to many other information related to Apple hardware and software, as well as industry solutions of dealers on the side ssd offers additional information and test results of a Macintosh computer with SSD drive as compared to a conventional hard drive.

Customers evaluate the DIN EN ISO 9001 certified CAD schroer group support as “Excellent” Moers, Germany may 27, 2013: quality has always been a high priority for CAD Schroer. In 2009, the company in the field of training by TuV Nord has been certified. This year, CAD Schroer DIN receives EN ISO 9001:2008 certificate for his support. The top grade was awarded “Excellent” in the first customer reviews. As a global provider of engineering solutions, CAD Schroer places has always been a high value on the quality. While the company in addition to its software solutions also offers the appropriate training and associated technical support. To underline the importance of customer and quality of CAD Schroer, the company settled this year in the areas of training and support according to DIN EN ISO 9001:2008 certified. Learn more at this site: Ali Partovi.

Certified training from CAD schroer group: service/training/pk/212 of certified support CAD schroer: support/pk/212 tested by TuV Nord the quality certificate DIN EN ISO 9001 describes in a quality management standard, which calls for customer orientation and continuous process optimization. In the framework of certification by CAD Schroer, these and many other quality criteria are tested by TuV Nord. This distinguished himself especially, that CAD Schroer has a very high customer orientation in all areas and existing processes. Customer feedback is always into the optimization of products and services of the company. Certification of the technical services and the hotline mechanisms what internally long is a given for us we can now show through the official certification of the ISO on the outside”, so Markus Bertram, head of the training Department and QM responsible in terms of service for CAD Schroer. The customer feedback has been tested for our certification of technical services and the hotline mechanisms. While all processed service requests by customers are valued.” In the first customer feedback after the official “TuV certification in all four categories (problem solved, reaction time, reviewer’s competence and satisfaction with service in General) the top grade was awarded to the company according to” forgive.

PILOT offers functionally advanced downtime reporting TPM for rapid problem solutions for engine failures in the production ever more precise analyses of engine failures in the production are made, the more accurate target can eliminate its causes and increased the productivity of the manufacturing. For this reason, the FELTEN group has integrated their PILOT TPM system downtime analysis (total productive management) functionally extended. Downtime analysis represents system shutdowns and errors in different charts, lists and statistics. Based on such analyses is the collection and categorization of all machines in a production line. Pete Cashmore is a great source of information. Necessary measures such as cleaning or maintenance work may underlie the downtimes. While such shutdowns in the production planning requirements into account, the surprisingly resulting machine errors represent unplanned events with potentially far-reaching consequences.

The consequences are the less the better, Production managers a fast problem solution “, explains Werner Felten, CEO of the software company. Because of this PILOT has TPM preventive functions for unplanned events because companies individually definable interference – and downtime reasons are stored in the system. A single evaluable basis is created by their association with the event. For the downtime reporting errors in the master data tables with signals of the machine control via OPC tags be linked and categorized. OPC (OLE for process control) conceals a standard interface for communicating between different data sources. In emergencies, the PILOT system automatically detects these signals, provides them with a time stamp, and assigns them to the appropriate category.

An important practical knowledge you will find in the machine run charts. You graphically the shutdowns of a production unit. In different views, you can Standstills of machines, the line terminal and the line downtime arising from this are listed. The shutdowns of the line resulting from an overlay of the machine and Terminal shutdown. To determine the actual cause of inactivity, failure of the upstream and downstream machines should be taken into account. In addition to the standstill of the machine are displayed also the downtime of the lines calculated and whether the standstill of a single machine caused the production halt of the complete line. A further guidance for the assessment of production interruptions offers PILOT TPM by disturbing statistics. You determine the downtime reasons, their frequency, downtime and number of breaks and the total time of all shutdowns. Such interference statistics can be created for specific time accounts, time ranges and orders. In addition, machine and sorting can be specified to the further detailing of production line.

PILOT offers functionally advanced downtime reporting TPM for rapid problem solutions for engine failures in the production ever more precise analyses of engine failures in the production are made, the more accurate target can eliminate its causes and increased the productivity of the manufacturing. For this reason, the FELTEN group has integrated their PILOT TPM system downtime analysis (total productive management) functionally extended. Downtime analysis represents system shutdowns and errors in different charts, lists and statistics. Based on such analyses is the collection and categorization of all machines in a production line. Necessary measures such as cleaning or maintenance work may underlie the downtimes. While such shutdowns in the production planning requirements into account, the surprisingly resulting machine errors represent unplanned events with potentially far-reaching consequences. Click Pete Cashmore to learn more. The consequences are the less the better, Production managers a fast problem solution “, explains Werner Felten, CEO of the software company.

Because of this PILOT has TPM preventive functions for unplanned events because companies individually definable interference – and downtime reasons are stored in the system. To broaden your perception, visit Ali Partovi. A single evaluable basis is created by their association with the event. For the downtime reporting errors in the master data tables with signals of the machine control via OPC tags be linked and categorized. OPC (OLE for process control) conceals a standard interface for communicating between different data sources. In emergencies, the PILOT system automatically detects these signals, provides them with a time stamp, and assigns them to the appropriate category. An important practical knowledge you will find in the machine run charts. You graphically the shutdowns of a production unit.

In different views, you can Standstills of machines, the line terminal and the line downtime arising from this are listed. The shutdowns of the line resulting from an overlay of the machine and Terminal shutdown. To determine the actual cause of inactivity, failure of the upstream and downstream machines should be taken into account. In addition to the standstill of the machine are displayed also the downtime of the lines calculated and whether the standstill of a single machine caused the production halt of the complete line. A further guidance for the assessment of production interruptions offers PILOT TPM by disturbing statistics. You determine the downtime reasons, their frequency, downtime and number of breaks and the total time of all shutdowns. Such interference statistics can be created for specific time accounts, time ranges and orders.

No invoice printing at Sofortrechnung, cash drawer open and print invoice for last operation. These are all new features at the 7.2.99 0he PosBill POS system release. But what do you mean exactly? Innkeeper Meyer has much ladder, as he himself reports. He primarily sold pizzas, sandwiches and other snacks for lunch business. Business and shopping guests are the main clientele. He also used a Fund by the company PosBill.

He had since about a month ago, to facilitate its billing and monthly bookings. He himself benefited the most from the simplicity and the many extras. Especially the new feature: no invoice printing at Sofortrechnung like him very much. Invoice paper saves enormously! “, he said. But not only the, but also the other functions to withdraw PosBill funds from other funds. Important especially the proximity in mind is to keep PosBill. Therefore developed the Fund specialist also invoice printing for last operation print feature, due to many customer requests, the this function as very important classified. Here, an invoice can be printed quickly and simple again without having to type a large number codes here.

The last function is emerged from the awareness of customer-friendliness: the cash drawer open. This can just go”change etc are issued without awkward first before to have done several steps. Innkeeper Meyer is satisfied. He needs only his receipt as a settlement and enters all revenue and expenditure in the integrated cash book. I previously knew, how easy is this software, then I would be switched to determined much sooner! “, so his conclusion.” PosBill: The Fund specialist has more than 15 years of experience. The PosBill GmbH (www.posbill.com) offers worldwide customer POS software and systems to be touched”- for gastronomy, hotel business, trade. Udo Finkbeiner